Corrosion Studies Of Diffusion Bonding On Aluminium -Fly Ash (ALFA) Composites By Taguchi Technique

Authors

  • A.Sittaramane University College of Engineering Panruti, Author
  • P. Lakshmikanthan University College of Engineering Panruti, Author
  • M.Praveen University College of Engineering Panruti, Author
  • D. George Oliver CK College of Engineering and Technology Cuddalore Author

DOI:

https://doi.org/10.54228/y3q7rs87

Keywords:

Diffusion bonding, Aluminium – Fly ash, Taguchi technique, ANOVA

Abstract

In this study, the corrosion behaviour of Diffusion Bonding (DB) on Aluminium Fly Ash (ALFA)
composites was investigated. Bonding parameters were optimized for maximization of corrosion resistance on Taguchi 
design of experiments (L9 orthogonal array)with three bonding parameters such as temperature, pressure, and time.
The corrosion behaviour of bonded ALFA composites was investigated using polarization in 3.5 wt% NaCl solution. 
Analysis of variance (ANOVA) was used to examine the results. The optimum bonding parameter combination for
minimum corrosion behaviour is A1B1C3, which is 450°C(temperature), 8MPa (pressure), and 20 minutes (time). The 
corrosion resistance of bonded ALFA composite is predicted to be optimal at 0.04387. A confirmation test is used to 
validatethe results

Downloads

Download data is not yet available.

Author Biographies

  • A.Sittaramane, University College of Engineering Panruti,

    Department of Mechanical Engineering,

  • P. Lakshmikanthan, University College of Engineering Panruti,

    Department of Mechanical Engineering,

  • M.Praveen, University College of Engineering Panruti,

    Department of Mechanical Engineering,

  • D. George Oliver, CK College of Engineering and Technology Cuddalore

    Department of Mechanical Engineering,

Downloads

Published

2024-11-20

Issue

Vol. 3 No. 1 (2023)

Section

Research Articles(s)

License

License Terms for MJARET

Creative Commons Attributio 4.0 International (CC BY) License:

This license allows for the following:

  1. Sharing — Copy and redistribute the material in any medium or format.

  2. Adaptation — Remix, transform, and build upon the material.

The license is subject to the following terms:

  • Attribution:

    • You must give appropriate credit, provide a link to the license, and indicate if changes were made.
    • Attribution should include the citation of the article, the author's name, and a link to the original work published in MJARET.
    • This must be done in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • NonCommercial:

    • The material cannot be used for commercial purposes.
    • Any use of the work intended to provide a commercial advantage or monetary compensation is considered outside the scope of this license.

  • No Additional Restrictions:

    • You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

General Provisions:

  • Understandability: This license can be revoked if you do not comply with its terms and conditions.
  • Public Domain: Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
  • Other Rights:
    • The license does not cover rights such as publicity, privacy, or moral rights that may affect your ability to use the material as contemplated by the license.
    • Such rights might need to be considered and respected separately.

Disclaimer:

  • MJARET does not provide any warranties with the work. The work is provided "as is" without any representations or warranties, express or implied. MJARET will not be liable for any damages resulting from the use of the work.

How to Cite:

  • Proper attribution for use of the licensed work should follow the standard citation format provided by MJARET, which should include the author(s), the title of the work, MJARET, and the DOI link.

Most read articles by the same author(s)